Hallab, N. J., & Jacobs, J. J. (2020). Orthopedic applications. In Biomaterials science (pp. 1079–1118). Elsevier. https://doi.org/10.1016/B978-0-12-816137-1.00070-2

Schwarzmann, P. (2024). 3D-printing in orthopedics. In K. A. Coleman (Ed.), Techniques in small animal soft tissue, orthopedic, and ophthalmic surgery (1st ed., pp. 455–463). Wiley. https://doi.org/10.1002/9781394159970.ch41

Chapter  Google Scholar 

Talaat, F. M., & Hassan, E. (2021). Artificial intelligence in 3D printing. In A. E. Hassanien, A. Darwish, S. M. AbdEl-Kader, & D. A. Alboaneen (Eds.), Enabling machine learning applications in data science in algorithms for intelligent systems (pp. 77–88). Singapore: Springer. https://doi.org/10.1007/978-981-33-6129-4_6

Chapter  Google Scholar 

Agarwal, R., Gupta, V., & Singh, J. (2022). Additive manufacturing-based design approaches and challenges for orthopaedic bone screws: A state-of-the-art review. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(1), 37. https://doi.org/10.1007/s40430-021-03331-8

Article  CAS  Google Scholar 

Rodriguez Colon, R., et al. (2023). The presence of 3D printing in orthopedics: A clinical and material review. Journal Orthopaedic Research, 41(3), 601–613. https://doi.org/10.1002/jor.25388

Article  Google Scholar 

Della Bona, A., Cantelli, V., Britto, V. T., Collares, K. F., & Stansbury, J. W. (2021). 3D printing restorative materials using a stereolithographic technique: a systematic review. Dental Materials, 37(2), 336–350. https://doi.org/10.1016/j.dental.2020.11.030

Article  CAS  PubMed  Google Scholar 

Duan, X., Wang, B., Yang, L., & Kadakia, A. R. (2021). Applications of 3D Printing technology in orthopedic treatment. BioMed Research International, 2021, 1–3. https://doi.org/10.1155/2021/9892456

Article  Google Scholar 

Shaikh, S. (2024). 3D printing in orthopaedic implants: Design, materials, application. In 3D printing in prosthetics and orthotics, in biomedical materials for multi-functional applications (pp. 57–67). Springer. https://doi.org/10.1007/978-981-97-4913-3_5

Wong, R. M. Y., et al. (2021). 3D printing in orthopaedic surgery: A scoping review of randomized controlled trials. Bone and Joint Research, 10(12), 807–819. https://doi.org/10.1302/2046-3758.1012.BJR-2021-0288.R2

Article  PubMed  PubMed Central  Google Scholar 

Banerjee, A., Haridas, H. K., SenGupta, A., & Jabalia, N. (2022). Artificial intelligence in 3D printing: A revolution in health care. In K. Sandhu, S. Singh, C. Prakash, N. R. Sharma, & K. Subburaj (Eds.), Emerging applications of 3D printing during CoVID 19 pandemic. Lecture notes in bioengineering (pp. 57–79). Singapore: Springer. https://doi.org/10.1007/978-981-33-6703-6_4

Chapter  Google Scholar 

Ejnisman, L., Gobbato, B., De França Camargo, A. F., & Zancul, E. (2021). Three-dimensional printing in orthopedics: from the basics to surgical applications. Current Reviews in Musculoskeletal Medicine, 14(1), 1–8. https://doi.org/10.1007/s12178-020-09691-3

Article  PubMed  PubMed Central  Google Scholar 

Meng, M., Wang, J., Huang, H., Liu, X., Zhang, J., & Li, Z. (2023). 3D printing metal implants in orthopedic surgery: Methods, applications and future prospects. Journal of Orthopaedic Translation, 42, 94–112. https://doi.org/10.1016/j.jot.2023.08.004

Article  PubMed  PubMed Central  Google Scholar 

Hung, H.-C., Wang, Y.-C., & Wang, Y.-C. (2020). Applications of artificial intelligence in orthodontics. Taiwanese Journal of Orthodontics. https://doi.org/10.38209/2708-2636.1005

Article  Google Scholar 

Pugliese, R., & Regondi, S. (2022). Artificial intelligence-empowered 3D and 4D printing technologies toward smarter biomedical materials and approaches. Polymers, 14(14), 2794. https://doi.org/10.3390/polym14142794

Article  CAS  PubMed  PubMed Central  Google Scholar 

Siemasz, R., Tomczuk, K., & Malecha, Z. (2020). 3D printed robotic arm with elements of artificial intelligence. Procedia Computer Science, 176, 3741–3750. https://doi.org/10.1016/j.procs.2020.09.013

Article  Google Scholar 

Liu, Z., Wang, Y., Wu, B., Cui, C., Guo, Y., & Yan, C. (2019). A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts. International Journal of Advanced Manufacturing Technology, 102(9–12), 2877–2889. https://doi.org/10.1007/s00170-019-03332-x

Article  Google Scholar 

Aksoy, B., Salman, O., Sayin, I., & Özsoy, K. (2021). 11 Artificial intelligence applications for medical diagnosis and production with 3D printing technologies. In D. Gupta, U. Kose, B. Le Nguyen, & S. Bhattacharyya (Eds.), Artificial intelligence for data-driven medical diagnosis (pp. 225–244). De Gruyter. https://doi.org/10.1515/9783110668322-011

Chapter  Google Scholar 

Shaikh, M., Kahwash, F., Lu, Z., Alkhreisat, M., Mohammad, A., & Shyha, I. (2024). Revolutionising orthopaedic implants—a comprehensive review on metal 3D printing with materials, design strategies, manufacturing technologies, and post-process machining advancements. International Journal of Advanced Manufacturing Technology, 134(3–4), 1043–1076. https://doi.org/10.1007/s00170-024-14218-y

Article  Google Scholar 

Ateeq, M., Shafique, M., Azam, A., & Rafiq, M. (2023). A review of 3D printing of the recycled carbon fiber reinforced polymer composites: Processing, potential, and perspectives. Journal of Materials Research and Technology, 26, 2291–2309. https://doi.org/10.1016/j.jmrt.2023.07.171

Article  CAS  Google Scholar 

Goh, G. D., Sing, S. L., & Yeong, W. Y. (2021). A review on machine learning in 3D printing: Applications, potential, and challenges. Artificial Intelligence Review, 54(1), 63–94. https://doi.org/10.1007/s10462-020-09876-9

Article  Google Scholar 

Shaikh, S. (2024). 3D printing technologies and materials for prosthetics and orthotics. In 3D printing in prosthetics and orthotics, biomedical materials for multi-functional applications (pp. 13–34). Springer. https://doi.org/10.1007/978-981-97-4913-3_2

Maglara, E., et al. (2020). Three-dimensional (3D) printing in orthopedics education. Journal of Long-Term Effects of Medical Implants, 30(4), 255–258. https://doi.org/10.1615/JLongTermEffMedImplants.2020036911

Article  PubMed  Google Scholar 

Liu, Z., et al. (2022). 3D-printed hydrogels in orthopedics: Developments, limitations, and perspectives. Frontiers in Bioengineering and Biotechnology, 10, Article 845342. https://doi.org/10.3389/fbioe.2022.845342

Article  PubMed  PubMed Central  Google Scholar 

Kumar, L., Haleem, A., & Javaid, M. (2021). Impact of three dimensional printing in orthopedics. Global Health Journal, 5(4), 178–182. https://doi.org/10.1016/j.glohj.2021.11.009

Article  Google Scholar 

Kristiawan, R. B., Imaduddin, F., Ariawan, D., Ubaidillah, A., & Arifin, Z. (2021). A review on the fused deposition modeling (FDM) 3D printing: Filament processing, materials, and printing parameters. Open Engineering, 11(1), 639–649. https://doi.org/10.1515/eng-2021-0063

Article  CAS  Google Scholar 

Rahim, T. N. A. T., Abdullah, A. M., & MdAkil, H. (2019). Recent developments in fused deposition modeling-based 3d printing of polymers and their composites. Polymer Reviews, 59(4), 589–624. https://doi.org/10.1080/15583724.2019.1597883

Article  CAS  Google Scholar 

Siemiński, P. (2021). Introduction to fused deposition modeling. In Additive manufacturing (pp. 217–275). Elsevier. https://doi.org/10.1016/B978-0-12-818411-0.00008-2

Doshi, M., Mahale, A., Kumar Singh, S., & Deshmukh, S. (2022). Printing parameters and materials affecting mechanical properties of FDM-3D printed Parts: Perspective and prospects. Materials Today: Proceedings, 50, 2269–2275. https://doi.org/10.1016/j.matpr.2021.10.003

Article  Google Scholar 

Parulski, C., Jennotte, O., Lechanteur, A., & Evrard, B. (2021). Challenges of fused deposition modeling 3D printing in pharmaceutical applications: Where are we now? Advanced Drug Delivery Reviews, 175, Article 113810. https://doi.org/10.1016/j.addr.2021.05.020

Article  CAS  PubMed  Google Scholar 

Ferretti, P., et al. (2021). Relationship between FDM 3D printing parameters study: Parameter optimization for lower defects. Polymers, 13(13), 2190. https://doi.org/10.3390/polym13132190

Article  CAS  PubMed  PubMed Central  Google Scholar 

Salentijn, G. I., Oomen, P. E., Grajewski, M., & Verpoorte, E. (2017). Fused deposition modeling 3D printing for (bio)analytical device fabrication: Procedures, materials, and applications. Analytical Chemistry, 89(13), 7053–7061. https://doi.org/10.1021/acs.analchem.7b00828

Article  CAS  PubMed  PubMed Central  Google Scholar 

Redaelli, D. F., et al. (2020). 3D printing orthopedic scoliosis braces: A test comparing FDM with thermoforming. International Journal of Advanced Manufacturing Technology, 111(5–6), 1707–1720. https://doi.org/10.1007/s00170-020-06181-1

Article  Google Scholar 

Frizziero, L., et al. (2021). Heat sterilization effects on polymeric, FDM-optimized orthopedic cutting guide for surgical procedures. JFB, 12(4), 63. https://doi.org/10.3390/jfb12040063

Article  CAS  PubMed  PubMed Central  Google Scholar 

Cui, M., Hu, N., Fang, D., Sun, H., Pan, H., & Pan, W. (2022). Fabrication and evaluation of customized implantable drug delivery system for orthopedic therapy based on 3D printing technologies. International Journal of Pharmaceutics, 618, Article 121679. https://doi.org/10.1016/j.ijpharm.2022.121679

Article  CAS  PubMed