Abdelmouleh M, Jedidi I (2021) Development of ldpe crystallinity in ldpe/cu composites. In: Material flow analysis. IntechOpen, p 71
Adik N, Lin O, Akil HM, Sandu AV, Villagracia A, Santos GN et al (2016) Effects of stearic acid on tensile, morphological and thermal analysis of polypropylene (pp)/dolomite (dol) composites. Mater Plast 53(1):61–64
Alagar M, Kumar MSC, Prabu AA (2003) Studies on electrical and thermal properties of vinyloxyaminosilane grafted ethylene–propylene–diene terpolymer/linear low density polyethylene blends for cable applications. Polym J 35(1):30–36
Al-Salem S, Al-Nasser A, Behbehani M, Sultan H, Karam H, Al-Wadi M, Al-Dhafeeri A, Rasheed Z, AlFoudaree M (2019) Thermal response and degressive reaction study of oxo-biodegradable plastic products exposed to various degradation media. Int J Polym Sci 2019:1–15
Ankanahalli Shankaregowda S, Sagade Muktar Ahmed RF, Liu Y, Bananakere Nanjegowda C, Cheng X, Shivanna S, Ramakrishna S, Yu Z, Zhang X, Sannathammegowda K (2019) Dry-coated graphite onto sandpaper for triboelectric nanogenerator as an active power source for portable electronics. Nanomaterials 9(11):1585
Article PubMed PubMed Central Google Scholar
Bae J-S, Oh S-K, Pedrycz W, Fu Z (2019) Design of fuzzy radial basis function neural network classifier based on information data preprocessing for recycling black plastic wastes: comparative studies of atr ft-ir and raman spectroscopy. Appl Intell 49:929–949
Baibarac M, Baltog I, Lefrant S, Mevellec J, Bucur C (2008) Vibrational and photoluminescence properties of the polystyrene functionalized single-walled carbon nanotubes. Diam Relat Mater 17(7–10):1380–1388
Bajwa GS, Singari RM, Mishra RS et al (2021) The natural fibre and nano talc based hybrid composite of polypropylene: thermal performance. Indian J Eng Mater Sci (IJEMS) 27(4):866–871
Bakshi P, Pappu A, Bharti DK, Patidar R (2021) Accelerated weathering performance of injection moulded pp and ldpe composites reinforced with calcium rich waste resources. Polym Degrad Stab 192:109694
Bardají DKR, Furlan JPR, Stehling EG (2019) Isolation of a polyethylene degrading Paenibacillus sp. from a landfill in Brazil. Arch Microbiol 201:699–704
Brostow W (2010) Maleic anhydride grafted polypropylene coatings on steel: adhesion and wear. PhD thesis, University of North Texas
Bukhari MU, Khan A, Maqbool KQ, Arshad A, Riaz K, Bermak A (2022) Waste to energy: facile, low-cost and environment-friendly triboelectric nanogenerators using recycled plastic and electronic wastes for self-powered portable electronics. Energy Rep 8:1687–1695
Burfield DR, Loi PS (1988) The use of infrared spectroscopy for determination of polypropylene stereoregularity. J Appl Polym Sci 36(2):279–293
Casimir D, Alghamdi H, Ahmed IY, Garcia-Sanchez R, Misra P (2019) Raman spectroscopy of graphene, graphite and graphene nanoplatelets. IntechOpen, London, UK
Chen J, Jia Y, Zhang Z, Wang X, Yang L (2015) Effects of chlorinated polypropylene on the conformation of polypropylene in polypropylene/chlorinated polypropylene/polyaniline composites. J Spectrosc 2015:1–8
Chen Y, Zhang H, Xu C, Cong R, Fang G (2022) Thermal properties of 1-hexadecanol/high density polyethylene/graphene nanoplates composites as form-stable heat storage materials. Sol Energy Mater Sol Cells 237:111580
Das MP, Kumar S (2015) An approach to low-density polyethylene biodegradation by bacillus amyloliquefaciens. 3 Biotech 5(1):81–86
Demir E, Ünsal ÖF, Emiroglu F, Bedeloglu A (2021) Wearable textile-based piezoelectric nanogenerators with graphene/zno/agnw. Eskisehir Techn Univ J Sci Technol A Appl Sci Eng 22:59–69
Dogan M (2021) Ultraviolet light accelerates the degradation of polyethylene plastics. Microsc Res Techn 84(11):2774–2783
Dresselhaus M, Jorio A, Saito R (2010) Characterizing graphene, graphite, and carbon nanotubes by raman spectroscopy. Annu Rev Condens Matter Phys 1(1):89–108
Feng X, Li Q, Wang K (2020) Waste plastic triboelectric nanogenerators using recycled plastic bags for power generation. ACS Appl Mater Interfaces 13(1):400–410
Ferrari AC (2007) Raman spectroscopy of graphene and graphite: Disorder, electron–phonon coupling, doping and nonadiabatic effects. Solid State Commun 143(1–2):47–57
Ferrari AC, Meyer JC, Scardaci V, Casiraghi C, Lazzeri M, Mauri F, Piscanec S, Jiang D, Novoselov KS, Roth S et al (2006) Raman spectrum of graphene and graphene layers. Phys Rev Lett 97(18):187401
Article CAS PubMed Google Scholar
Gan B, Bilek M, Kondyurin A, Mizuno K, McKenzie D (2006) Etching and structural changes in nitrogen plasma immersion ion implanted polystyrene films. Nucl Instrum Methods Phys Res Sect B 247(2):254–260
Ghosh SK, Mandal D (2016) High-performance bio-piezoelectric nanogenerator made with fish scale. Appl Phys Lett. https://doi.org/10.1063/1.4961623
Greeshma M, Sreenidhi P (2021) Material design for self powered cranial drill using piezoelectric effect–a comsol study. In: 2021 4th Biennial international conference on nascent technologies in engineering (ICNTE). IEEE, pp 1–5
Gulmine J, Janissek P, Heise H, Akcelrud L (2002) Polyethylene characterization by ftir. Polym Test 21(5):557–563
Gupta AK, Hsu C-H, Lai S-N, Lai C-S (2020) Zno-polystyrene composite as efficient energy harvest for self powered triboelectric nanogenerator. ECS J Solid State Sci Technol 9(11):115019
Hesham R, Soltan A, Madian A (2021) Energy harvesting schemes for wearable devices. AEU Int J Electron Commun 138:153888
Jalili M, Khosroshahi Z, Kheirabadi NR, Karimzadeh F, Enayati M (2021) Green triboelectric nanogenerator based on waste polymers for electrophoretic deposition of titania nanoparticles. Nano Energy 90:106581
Ji SH, Lee W, Yun JS (2020) All-in-one piezo-triboelectric energy harvester module based on piezoceramic nanofibers for wearable devices. ACS Appl Mater Interfaces 12(16):18609–18616
Article CAS PubMed Google Scholar
Jiang T, Qi Y, Wu Y, Zhang J (2019) “Application of antioxidant and ultraviolet absorber into hdpe: Enhanced resistance to uv irradiation. E-Polymers 19(1):499–510
Jiang D, Su Y, Wang K, Wang Y, Xu M, Dong M, Chen G (2020) A triboelectric and pyroelectric hybrid energy harvester for recovering energy from low-grade waste fluids. Nano Energy 70:104459
Kaniyoor A, Ramaprabhu S (2012) A raman spectroscopic investigation of graphite oxide derived graphene. AIP Adv. https://doi.org/10.1063/1.4756995
Khandelwal G, Chandrasekhar A, Alluri NR, Vivekananthan V, Raj NPMJ, Kim S-J (2018) Trash to energy: a facile, robust and cheap approach for mitigating environment pollutant using household triboelectric nanogenerator. Appl Energy 219:338–349
Kochetov R, Christen T, Gullo F (2017) Ftir analysis of ldpe and xlpe thin samples pressed between different protective anti-adhesive films. In: 2017 1st International conference on electrical materials and power equipment (ICEMPE). IEEE, pp 49–52
Kovács RL, Csontos M, Gyöngyösi S, Elek J, Parditka B, Deák G, Kuki Á, Kéki S, Erdélyi Z (2021) Surface characterization of plasma-modified low density polyethylene by attenuated total reflectance fourier-transform infrared (atr-ftir) spectroscopy combined with chemometrics. Polym Testing 96:107080
Leonov V (2010) Energy harvesting for self-powered wearable devices. In: Bonfiglio A, De Rossi D (eds) Wearable monitoring systems. Springer, Boston, pp 27–49
Liang X, Huang D (2012) New insights into the effects of physical aging on glass transition of polystyrene by FTIR. J Macromol Sci B 51(2):348–357
Liao K, Ye X-Y, Chen P-C, Xu Z-K (2014) Biomineralized polypropylene/caco3 composite nonwoven meshes for oil/water separation. J Appl Polym Sci. https://doi.org/10.1002/app.39897
Lin J-H, Pan Y-J, Liu C-F, Huang C-L, Hsieh C-T, Chen C-K, Lin Z-I, Lou C-W (2015) Preparation and compatibility evaluation of polypropylene/high density polyethylene polyblends. Materials 8(12):8850–8859
Article PubMed PubMed Central Google Scholar
Maiti S, Karan SK, Kim JK, Khatua BB (2019) Nature driven bio-piezoelectric/triboelectric nanogenerator as next-generation green energy harvester for smart and pollution free society. Adv Energy Mater 9(9):1803027
Malakhov SN, Dmitryakov PV, Pichkur EB, Chvalun SN (2020) Nonwoven materials produced by melt electrospinning of polypropylene filled with calcium carbonate. Polymers 12(12):2981
Comments (0)