Aktar Zahid Sohag Md, Gupta P, Kondal N et al (2020) Effect of ceramic reinforcement on the microstructural, mechanical and tribological behavior of Al-Cu alloy metal matrix composite. Mater Today Proc 21:1407–1411. https://doi.org/10.1016/j.matpr.2019.08.179

Article  CAS  Google Scholar 

Arivukkarasan S, Dhanalakshmi V, Stalin B, Ravichandran M (2018) Mechanical and tribological behaviour of tungsten carbide reinforced aluminum LM4 matrix composites. Part Sci Technol 36:967–973. https://doi.org/10.1080/02726351.2017.1331285

Article  CAS  Google Scholar 

Ashby MF, Jones DRH (2014) Engineering materials 2: an introduction to microstructures, processing and design. Elsevier Science, Amsterdam

Google Scholar 

Aynalem GF (2020) Processing methods and mechanical properties of aluminium matrix composites. Adv Mater Sci Eng 2020:3765791. https://doi.org/10.1155/2020/3765791

Article  CAS  Google Scholar 

Azadi M, Zolfaghari M, Rezanezhad S, Azadi M (2018) Effects of SiO2 nano-particles on tribological and mechanical properties of aluminum matrix composites by different dispersion methods. Appl Phys A 124:377. https://doi.org/10.1007/s00339-018-1797-9

Article  CAS  Google Scholar 

Azhagiri P, Senthilkumar N, Palanikumar K, Deepanraj B (2023) Mechanical properties evaluation on hybrid AA6026 composites added with nanoclay and carbon fibers. Carbon Lett 33:833–846. https://doi.org/10.1007/s42823-023-00464-9

Article  Google Scholar 

Balamurugan K, Shanmugam V, Palani G et al (2023) Effect of TiC/RHA on solid particle erosion of Al6061 hybrid composites fabricated through a 2-step ultrasonic-assisted stir casting process. J Mater Res Technol 25:4888–4900. https://doi.org/10.1016/j.jmrt.2023.06.225

Article  CAS  Google Scholar 

Boisse P (2020) Composite reinforcements for optimum performance. Elsevier Science, Amsterdam

Google Scholar 

Borodianskiy K, Zinigrad M (2016) Modification performance of WC nanoparticles in aluminum and an Al–Si casting alloy. Metall Mater Trans B 47:1302–1308. https://doi.org/10.1007/s11663-016-0586-0

Article  CAS  Google Scholar 

Brackmann L, Röttger A, Weber S, Theisen W (2021) Subcritical crack growth in hard alloys under cyclic loading. Fatigue Fract Eng Mater Struct 44:349–365. https://doi.org/10.1111/ffe.13363

Article  Google Scholar 

Çalıgülü U, Kaçmış MV, Karabacak AH et al (2023) Investigation of corrosion resistance and impact performance properties of Al2O3/SiC-doped aluminium-based composites. Bull Mater Sci 46:156. https://doi.org/10.1007/s12034-023-02998-0

Article  CAS  Google Scholar 

Callister WD, Rethwisch DG (2022) Fundamentals of materials science and engineering: an integrated approach. Wiley, Hoboken

Google Scholar 

Cavaliere P, Jahantigh F, Shabani A, Sadeghi B (2018) Influence of SiO2 nanoparticles on the microstructure and mechanical properties of Al matrix nanocomposites fabricated by spark plasma sintering. Compos B Eng 146:60–68. https://doi.org/10.1016/j.compositesb.2018.03.045

Article  CAS  Google Scholar 

Chen G, Wu K, Wang Y et al (2023) Quantitative study on the correlation between microstructure and mechanical properties of additive friction stir deposited 6061–T6 Al–Mg–Si alloy. J Mater Res Technol 25:6725–6736. https://doi.org/10.1016/j.jmrt.2023.07.097

Article  CAS  Google Scholar 

Das P, Kumar TSS, Sahu KK, Gollapudi S (2022) Corrosion, stress corrosion cracking and corrosion fatigue behavior of magnesium alloy bioimplants. Corros Rev 40:289–333. https://doi.org/10.1515/corrrev-2021-0088

Article  CAS  Google Scholar 

Dasari BL, Morshed M, Nouri JM et al (2018) Mechanical properties of graphene oxide reinforced aluminium matrix composites. Compos B Eng 145:136–144. https://doi.org/10.1016/j.compositesb.2018.03.022

Article  CAS  Google Scholar 

Fahrenholtz WG, Wuchina EJ, Lee WE, Zhou Y (2014) Ultra-high temperature ceramics: materials for extreme environment applications. Wiley, Hoboken

Book  Google Scholar 

Ganapathy P, Manivasagam G, Rajamanickam A, Natarajan A (2015) Wear studies on plasma-sprayed Al2O3 and 8 mole% of Yttrium-stabilized ZrO2 composite coating on biomedical Ti-6Al-4V alloy for orthopedic joint application. Int J Nanomed. https://doi.org/10.2147/IJN.S79997

Article  Google Scholar 

Ganvir A, Jahagirdar AR, Mulone A et al (2021) Novel utilization of liquid feedstock in high velocity air fuel (HVAF) spraying to deposit solid lubricant reinforced wear resistant coatings. J Mater Process Technol 295:117203. https://doi.org/10.1016/j.jmatprotec.2021.117203

Article  CAS  Google Scholar 

Guo R, Shen P, Sun C et al (2016) Processing and mechanical properties of lamellar-structured Al–7Si–5Cu/TiC composites. Mater Des 106:446–453. https://doi.org/10.1016/j.matdes.2016.06.008

Article  CAS  Google Scholar 

Huang G, Hou W, Shen Y (2018) Evaluation of the microstructure and mechanical properties of WC particle reinforced aluminum matrix composites fabricated by friction stir processing. Mater Charact 138:26–37. https://doi.org/10.1016/j.matchar.2018.01.053

Article  CAS  Google Scholar 

Issa HK, Taherizadeh A, Maleki A, Ghaei A (2017) Development of an aluminum/amorphous nano-SiO2 composite using powder metallurgy and hot extrusion processes. Ceram Int 43:14582–14592. https://doi.org/10.1016/j.ceramint.2017.06.057

Article  CAS  Google Scholar 

Ji X, Zhao J, Jin J et al (2022) Tribological behavior of Cu-based bulk metallic glass compared to nickel-aluminum bronze in air and 3.5% sodium chloride solution. J Tribol 10(1115/1):4056282

Google Scholar 

Kayaroganam P, Krishnan V, Natarajan E et al (2021) Drilling parameters analysis on in-situ Al/B4C/Mica hybrid composite and an integrated optimization approach using fuzzy model and non-dominated sorting genetic algorithm. Metals (Basel) 11:2060. https://doi.org/10.3390/met11122060

Article  CAS  Google Scholar 

Kumar KR, Mohanasundaram KM, Subramanian R, Anandavel B (2014) Influence of fly ash particles on tensile and impact behaviour of aluminium (Al/3Cu/8.5Si) metal matrix composites. Sci Eng Compos Mater 21:181–189. https://doi.org/10.1515/secm-2013-0006

Article  CAS  Google Scholar 

Lekatou A, Karantzalis AE, Evangelou A et al (2015) Aluminium reinforced by WC and TiC nanoparticles (ex-situ) and aluminide particles (in-situ): microstructure, wear and corrosion behaviour. Mater Des 1980–2015(65):1121–1135. https://doi.org/10.1016/j.matdes.2014.08.040

Article  CAS  Google Scholar 

Mahajan YR, Johnson R (2020) Handbook of advanced ceramics and composites: defense, security, aerospace and energy applications. Springer International Publishing, Cham

Book  Google Scholar 

Maj J, Basista M, Węglewski W et al (2018) Effect of microstructure on mechanical properties and residual stresses in interpenetrating aluminum-alumina composites fabricated by squeeze casting. Mater Sci Eng: A 715:154–162. https://doi.org/10.1016/j.msea.2017.12.091

Article  CAS  Google Scholar 

Miniappan PK, Marimuthu S, Dharani Kumar S et al (2023) Exploring the mechanical, tribological, and morphological characteristics of areca fiber epoxy composites reinforced with various fillers for multifaceted applications. Front Mater. https://doi.org/10.3389/fmats.2023.1185215

Article  Google Scholar 

Nallusamy S, Logeshwaran J (2017) Effect on aluminium metal matrix composite reinforced with nano sized silica particles. J Metastab Nanocryst Mater 29:25–34. https://doi.org/10.4028/www.scientific.net/JMNM.29.25

Article  Google Scholar 

Nithin HS, Desai V, Ramesh MR (2018) Elevated temperature solid particle erosion behaviour of carbide reinforced CoCrAlY composite coatings. Mater Res Express 5:066529. https://doi.org/10.1088/2053-1591/aac998

Article  CAS  Google Scholar 

Ogunrinola I, Akinyemi M, Aizebeokhai A et al (2023) Silica and kaolin reinforced aluminum matrix composite for heat storage. Rev Adva Mater Sci. https://doi.org/10.1515/rams-2022-0305

Article  Google Scholar 

Orazem ME, Tribollet B (2011) Electrochemical impedance spectroscopy. Wiley, New Jersey

Google Scholar 

Pakdel A, Witecka A, Rydzek G, Awang Shri DN (2017) A comprehensive microstructural analysis of Al–WC micro- and nano-composites prepared by spark plasma sintering. Mater Des 119:225–234. https://doi.org/10.1016/j.matdes.2017.01.064

Article  CAS  Google Scholar 

Perumal G, Senthilkumar N, Palanikumar K, Anbazhaghan N (2023) Effect of plasma spraying parameters on wear and scratch resistance of Al2O3-40 wt% YSZ ceramic coatings deposited on Ti-6Al-4 V alloy. J Aust Ceram Soc 59:379–390. https://doi.org/10.1007/s41779-023-00835-5

Article  CAS  Google Scholar 

Ramón JE, Martínez I, Gandía-Romero JM, Soto J (2022) Improved tafel-based potentiostatic approach for corrosion rate monitoring of reinforcing steel. J Nondestr Eval 41:70. https://doi.org/10.1007/s10921-022-00903-z

Article  Google Scholar 

Rangrej S, Pandya S, Menghani J (2023) Effects of TiB2 reinforcement proportion on structure and properties of stir cast A713 composites. Can Metall Q 62:678–689. https://doi.org/10.1080/00084433.2022.2149202

Article